Faculty Profiles - WANG Ziqi | The Hong Kong University of Science and Technology

Ziqi WANG
汪子琦

DSc in Computational Analysis and Design of Structurally Stable Assembles with Rigid Parts
Swiss Federal Institute of Technology, Lausanne (EPFL), 2021

Assistant Professor
Division of Integrative Systems and Design

(852) 3469 3294
ziqiw@ust.hk
Room IAS1002
Personal Web

Google Scholar

LcUIp4oAAAAJ

ORCID

0000-0002-3817-3922

Scopus ID

57190445632

Research Interest Publications

Research Interest

Computational design
Robotic assembly
Simulation and modeling

Publications

All Years 14 2025 0 2024 2 2023 2 2022 2 2021 3 2020 0 2019 5

2024 2

Hierarchical tessellation enables programmable morphing matter

Matter, v. 7, (2), February 2024, p. 603-619
Yang, Xudong; Liu, Mingchao; Zhang, Bojian; Wang, Ziqi; Chen, Tianyu; Zhou, Yuan; Chen, Yu; Hsia, K. Jimmy; Wang, Yifan
Article

Computational design and fabrication of infinitely reusable kit of parts

Computational Design and Fabrication of Infinitely Reusable Kit of Parts / International Association for Shell and Spatial Structures (IASS). International Association for Shell and Spatial Structures (IASS), 2024
Huang, Yijiang; Wang, Ziqi; Hung, Yi-Hsiu; Jiang, Chenming; Gheyselinck, Aurèle; Coros, Stelian
Conference paper

2023 2

A Temporal Coherent Topology Optimization Approach for Assembly Planning of Bespoke Frame Structures

ACM Transactions on Graphics, v. 42, (4), July 2023, article number 144, p. 1-13
Wang, Ziqi; Kennel-Maushart, Florian; Huang, Yijiang; Thomaszewski, Bernhard; Coros, Stelian
Article

Masonry Shell Structures with Discrete Equivalence Classes

ACM Transactions on Graphics, v. 42, (4), July 2023, article number 115, p. 1-12
Chen, Rulin; Qiu, Pengyun; Song, Peng; Deng, Bailin; Wang, Ziqi; He, Ying
Article

2022 2

Computational design of high-level interlocking puzzles

ACM Transactions on Graphics, v. 41, (4), July 2022, article number 3530071, p. 1-15
Chen, Rulin; Wang, Ziqi; Song, Peng; Bickel, Bernd
Article

Computational Assemblies: Analysis, Design, and Fabrication

Computer Graphics Forum, v. 41, (2), December 2022, article number 14494, p. 1-112
Song, Peng; Wang, Ziqi; Livesu, Marco
Conference paper

2021 3

MOCCA: Modeling and optimizing cone-joints for complex assemblies

ACM Transactions on Graphics, v. 40, (4), July 2021, article number 181, p. 1-14
Wang, Ziqi; Song, Peng; Pauly, Mark
Article

Reusable support for additive manufacturing

Additive Manufacturing, v. 39, March 2021, article number 101840
Xu, Yang; Wang, Ziqi; Gong, Siyu; Chen, Yong
Article

State of the Art on Computational Design of Assemblies with Rigid Parts

Computer Graphics Forum, v. 40, (2), May 2021, p. 633-657
Wang, Ziqi; Song, Peng; Pauly, Mark
Article

2019 1

Design and structural optimization of topological interlocking assemblies

ACM Transactions on Graphics, v. 38, (6), November 2019, article number 193, p. 1-13
Wang, Ziqi; Song, Peng; Isvoranu, Florin; Pauly, Mark
Article

2018 3

Desia: A general framework for designing interlocking assemblies

ACM Transactions on Graphics, v. 37, (6), December 2018, article number 191, p. 1-14
Wang, Ziqi; Song, Peng; Pauly, Mark
Article

Machined sharp edge restoration for triangle mesh workpiece models derived from grid-based machining simulation

Computer-Aided Design and Applications, v. 15, (6), April 2018, p. 905-915
Wang, Ziqi; Chen, Jack Szu-Shen; Joy, Jimin; Feng, Hsi-Yung
Article

Desia: A general framework for designing interlocking assemblies

SIGGRAPH Asia 2018 Technical Papers, SIGGRAPH Asia 2018 / Association for Computing Machinery, Inc. New York, NY, United States : Association for Computing Machinery, Inc, 2018, Article number: 191
Wang, Ziqi; Song, Peng; Pauly, Mark
Conference paper

2016 1

CofiFab: Coarse-to-fine fabrication of large 3D objects

ACM Transactions on Graphics, v. 35, (4), July 2016, article number a45, p. 1-11
Song, Peng; Deng, Bailin; Wang, Ziqi; Dong, Zhichao; Li, Wei; Fu, Chi-Wing; Liu, Ligang
Conference paper

Article 1

Hierarchical tessellation enables programmable morphing matter

Matter, v. 7, (2), February 2024, p. 603-619
Yang, Xudong; Liu, Mingchao; Zhang, Bojian; Wang, Ziqi; Chen, Tianyu; Zhou, Yuan; Chen, Yu; Hsia, K. Jimmy; Wang, Yifan

Conference paper 1

Computational design and fabrication of infinitely reusable kit of parts

Computational Design and Fabrication of Infinitely Reusable Kit of Parts / International Association for Shell and Spatial Structures (IASS). International Association for Shell and Spatial Structures (IASS), 2024
Huang, Yijiang; Wang, Ziqi; Hung, Yi-Hsiu; Jiang, Chenming; Gheyselinck, Aurèle; Coros, Stelian

Article 2

A Temporal Coherent Topology Optimization Approach for Assembly Planning of Bespoke Frame Structures

ACM Transactions on Graphics, v. 42, (4), July 2023, article number 144, p. 1-13
Wang, Ziqi; Kennel-Maushart, Florian; Huang, Yijiang; Thomaszewski, Bernhard; Coros, Stelian

Masonry Shell Structures with Discrete Equivalence Classes

ACM Transactions on Graphics, v. 42, (4), July 2023, article number 115, p. 1-12
Chen, Rulin; Qiu, Pengyun; Song, Peng; Deng, Bailin; Wang, Ziqi; He, Ying

Article 1

Computational design of high-level interlocking puzzles

ACM Transactions on Graphics, v. 41, (4), July 2022, article number 3530071, p. 1-15
Chen, Rulin; Wang, Ziqi; Song, Peng; Bickel, Bernd

Conference paper 1

Computational Assemblies: Analysis, Design, and Fabrication

Computer Graphics Forum, v. 41, (2), December 2022, article number 14494, p. 1-112
Song, Peng; Wang, Ziqi; Livesu, Marco

Article 3

MOCCA: Modeling and optimizing cone-joints for complex assemblies

ACM Transactions on Graphics, v. 40, (4), July 2021, article number 181, p. 1-14
Wang, Ziqi; Song, Peng; Pauly, Mark

Reusable support for additive manufacturing

Additive Manufacturing, v. 39, March 2021, article number 101840
Xu, Yang; Wang, Ziqi; Gong, Siyu; Chen, Yong

State of the Art on Computational Design of Assemblies with Rigid Parts

Computer Graphics Forum, v. 40, (2), May 2021, p. 633-657
Wang, Ziqi; Song, Peng; Pauly, Mark

Article 1

Design and structural optimization of topological interlocking assemblies

ACM Transactions on Graphics, v. 38, (6), November 2019, article number 193, p. 1-13
Wang, Ziqi; Song, Peng; Isvoranu, Florin; Pauly, Mark

Article 2

Desia: A general framework for designing interlocking assemblies

ACM Transactions on Graphics, v. 37, (6), December 2018, article number 191, p. 1-14
Wang, Ziqi; Song, Peng; Pauly, Mark

Machined sharp edge restoration for triangle mesh workpiece models derived from grid-based machining simulation

Computer-Aided Design and Applications, v. 15, (6), April 2018, p. 905-915
Wang, Ziqi; Chen, Jack Szu-Shen; Joy, Jimin; Feng, Hsi-Yung

Conference paper 1

Desia: A general framework for designing interlocking assemblies

SIGGRAPH Asia 2018 Technical Papers, SIGGRAPH Asia 2018 / Association for Computing Machinery, Inc. New York, NY, United States : Association for Computing Machinery, Inc, 2018, Article number: 191
Wang, Ziqi; Song, Peng; Pauly, Mark

Conference paper 1

CofiFab: Coarse-to-fine fabrication of large 3D objects

ACM Transactions on Graphics, v. 35, (4), July 2016, article number a45, p. 1-11
Song, Peng; Deng, Bailin; Wang, Ziqi; Dong, Zhichao; Li, Wei; Fu, Chi-Wing; Liu, Ligang

2019 1

Design and structural optimization of topological interlocking assemblies

ACM Transactions on Graphics, v. 38, (6), November 2019, article number 193, p. 1-13
Wang, Ziqi; Song, Peng; Isvoranu, Florin; Pauly, Mark
Article

2018 3

Desia: A general framework for designing interlocking assemblies

ACM Transactions on Graphics, v. 37, (6), December 2018, article number 191, p. 1-14
Wang, Ziqi; Song, Peng; Pauly, Mark
Article

Machined sharp edge restoration for triangle mesh workpiece models derived from grid-based machining simulation

Computer-Aided Design and Applications, v. 15, (6), April 2018, p. 905-915
Wang, Ziqi; Chen, Jack Szu-Shen; Joy, Jimin; Feng, Hsi-Yung
Article

Desia: A general framework for designing interlocking assemblies

SIGGRAPH Asia 2018 Technical Papers, SIGGRAPH Asia 2018 / Association for Computing Machinery, Inc. New York, NY, United States : Association for Computing Machinery, Inc, 2018, Article number: 191
Wang, Ziqi; Song, Peng; Pauly, Mark
Conference paper

2016 1

CofiFab: Coarse-to-fine fabrication of large 3D objects

ACM Transactions on Graphics, v. 35, (4), July 2016, article number a45, p. 1-11
Song, Peng; Deng, Bailin; Wang, Ziqi; Dong, Zhichao; Li, Wei; Fu, Chi-Wing; Liu, Ligang
Conference paper

No Publications

Research Interest

Publications

2024 2

2023 2

2022 2

2021 3

2019 1

2018 3

2016 1

Article 1

Conference paper 1

Article 2

Article 1

Conference paper 1

Article 3

Article 1

Article 2

Conference paper 1

Conference paper 1

2019 1

2018 3

2016 1

Projects

From January 2023 to December 2025

Your browser is out of date!