Two-dimensional reinforcement learning model-free fault-tolerant control for batch processes against multi- faults

A network structure for industrial process fault diagnosis based on hyper feature extraction and stacked LSTM

A Selective Migration-Based Improved GPR Modeling Method for Batch Process

Advance Industrial Monitoring of Physio-Chemical Processes using Novel Integrated Machine Learning Approach

Combined Iterative Learning and Model Predictive Control Scheme for Nonlinear Systems

Constrained model predictive fault-tolerant control for nonlinear batch processes with time delay by integrating a LRF method and a switching strategy

Cooperative Distributed Predictive Control for Smart Injection Molding Systems With One-Tap Memory

Detecting Abnormality of Battery Lifetime from First-Cycle Data Using Few-Shot Learning

Fault detection using machine learning based dynamic ICA-distributed CCA: Application to industrial chemical process

Fault diagnosis of industrial process using attention mechanism with 3DCNN-LSTM

Non-excitation closed-loop identification based on hysteresis bias relay feedback

Reinforced convolutional neural network fault diagnosis of industrial production systems

Robust statistical industrial fault monitoring: A machine learning-based distributed CCA and low frequency control charts

State-of-power estimation for lithium-ion batteries based on a frequency-dependent integer-order model

Time-Specific Thresholds for Batch Process Monitoring: A Study Based on Two-Dimensional Conditional Variational Auto-Encoder

Two-dimensional optimization design of constrained minmax model predictive tolerant-fault control for nonlinear batch processes

A Virtual Cycle-based Iterative learning Control Framework for Repetitive System with Randomly Varying Initial State

Sliding Mode-based Two-Dimensional Iterative Learning Control for Systems with Uncertainties and External Disturbances

A master–slave generalized predictive synchronization control for preheating process of multi-cavity hot runner system

A quantitative method for early-stage detection of the internal-short-circuit in Lithium-ion battery pack under float-charging conditions

An aging- and load-insensitive method for quantitatively detecting the battery internal-short-circuit resistance

Conic Input Mapping Design of Constrained Optimal Iterative Learning Controller for Uncertain Systems

Data-Driven Optimal Synchronization Control for Leader-Follower Multiagent Systems

Event-Based Switching Iterative Learning Model Predictive Control for Batch Processes With Randomly Varying Trial Lengths

H_∞output feedback fault-tolerant control of industrial processes based on zero-sum games and off-policy Q-learning

Input Mapping Design for Batch-to-Batch Optimization with Limited Memory

Joint estimation of state-of-charge and state-of-health for all cells in the battery pack using "leader-follower" strategy

Meta-Learning With Distributional Similarity Preference for Few-Shot Fault Diagnosis Under Varying Working Conditions

Model Fusion and Multiscale Feature Learning for Fault Diagnosis of Industrial Processes

Multiobjective optimization of injection molding parameters based on the GEK-MPDE method

Multiscale monitoring of industrial chemical process using wavelet-entropy aided machine learning approach

Predicting battery impedance spectra from 10-second pulse tests under 10 Hz sampling rate

Process monitoring using recurrent Kalman variational auto-encoder for general complex dynamic processes

Reinforcement Learning-Based Optimal Fault-Tolerant Tracking Control of Industrial Processes

Smart batch process: The evolution from 1D and 2D to new 3D perspectives in the era of Big Data

Terminal constrained robust hybrid iterative learning model predictive control for complex time-delayed batch processes

Voltage profile reconstruction and state of health estimation for lithium-ion batteries under dynamic working conditions

基于静−动态特性协同感知的复杂工业过程运行状态评价

高分子注塑成型产品质量关键工艺参数的多目标优化设计

A Gradient Descent Method for Optimal Batch-to-Batch Control of Unknown Linear Systems

A Novel Semi-supervised Two-dimensional Dynamic Soft Sensor for Quality Prediction in Batch Processes

Multiscale Detection of Chemical Process Using Improved Distributed CCA-Wavelet Approach

Off-policy Q-learning-based Output Feedback Fault-tolerant Tracking Control of Industrial Processes

Using Frequency-Dependent Integer Order Models to Simulate Fractional Order Model for Battery Management

A Balancing Current Ratio based State-of-Health Estimation Solution for Lithium-Ion Battery Pack

Co-Estimation of State-of-Charge and State-of-Health for Lithium-Ion Batteries Considering Temperature and Ageing

Compressing and reconstructing the voltage data for lithium-ion batteries using model migration and un-equidistant sampling techniques

Conic Iterative Learning Control Using Distinct Data for Constrained Systems with State-Dependent Uncertainty

Continual learning classification method and its application to equipment fault diagnosis

Critical review of life cycle assessment of lithium-ion batteries for electric vehicles: A lifespan perspective

Event-triggered distributed robust model predictive control for a class of nonlinear interconnected systems

Future Ageing Trajectory Prediction for Lithium-ion Battery Considering the Knee Point Effect

Intelligent Fault Diagnosis for Chemical Processes Using Deep Learning Multimodel Fusion

Investigating Carbon Footprint and Carbon Reduction Potential Using a Cradle-to-Cradle LCA Approach on Lithium-Ion Batteries for Electric Vehicles in China

Investigating greenhouse gas emissions and environmental impacts from the production of lithium-ion batteries in China

Learning of Iterative Learning Control for Flexible Manufacturing of Batch Processes

Objectives, challenges, and prospects of batch processes: Arising from injection molding applications

Off-policy reinforcement learning-based novel model-free minmax fault-tolerant tracking control for industrial processes

Optimal Iterative Learning Control for Batch Processes in the Presence of Time-Varying Dynamics

Optimal synchronization control for heterogeneous multi-agent systems: Online adaptive learning solutions

Retrospective comparison of several typical linear dynamic latent variable models for industrial process monitoring

Soft Clustering of Retired Lithium-Ion Batteries for the Secondary Utilization Using Gaussian Mixture Model based on Electrochemical Impedance Spectroscopy

迭代学习模型预测控制研究现状与挑战

Batch Process Automation Methodology Development - a Thermoplastic Injection Molding Example

Combined Iterative Learning and Model Predictive Control Scheme for Nonlinear Batch Processes

Data-enhanced learning compensation for linear predictive control of nonlinear chemical processes

Quality defect analysis of injection molding based on gradient enhanced Kriging model

An improved real-valued negative selection algorithm based on the constant detector for anomaly detection

Comprehensive study and improvement of experimental methods for obtaining referenced battery state-of-power

Constrained model predictive fault-tolerant control for multi-time-delayed batch processes with disturbances: a Lyapunov-Razumikhin function method

Continual learning classification method for time-varying data space based on artificial immune system

Continual learning classification method with constant-sized memory cells based on the artificial immune system

Control-Oriented Two-Dimensional Online System Identification for Batch Processes

Data-Efficient Constrained Learning for Optimal Tracking of Batch Processes

Fault Diagnosis of Complex Chemical Processes Using Feature Fusion of a Convolutional Network

Iterative Learning Control for Multiphase Batch Processes With Asynchronous Switching

Non-stationary data reorganization for weighted wind turbine icing monitoring with Gaussian mixture model

RBF Neural Network Modeling Approach Using PCA Based LM–GA Optimization for Coke Furnace System

Reconstruction of the Incremental Capacity Trajectories from Current-Varying Profiles for Lithium-Ion Batteries

Recovering Large-scale Battery Aging Dataset With Machine Learning

Special issue “advanced process monitoring for industry 4.0”

Two-Dimensional Iterative Learning Model Predictive Control for Batch Processes: A New State Space Model Compensation Approach

A safe control scheme for the dense medium coal separation process based on Bayesian network and Active Learning

Battery State of Charge Estimation Considering the Uncertainties of Battery Ageing

A More General Incremental Inter -Agent Learning Adaptive Control for Multiple Identical Processes in Mass Production

A New Synthetic Minmax Optimization Design of H∞ LQ Tracking Control for Industrial Processes under Partial Actuator Failure

Battery incremental capacity curve extraction by a two-dimensional Luenberger–Gaussian-moving-average filter

Continual learning classification method with new labeled data based on the artificial immune system

Data-Driven Batch-End Quality Modeling and Monitoring Based on Optimized Sparse Partial Least Squares

Data-Driven Two-Dimensional Deep Correlated Representation Learning for Nonlinear Batch Process Monitoring

Design of a Switching Control Strategy for Time-Varying Delay Batch Processes Using Fault Probability-Based Average Dwell Time Method

Design of Modified 2-Degree-of-Freedom Proportional–Integral–Derivative Controller for Unstable Processes

Fast economic model predictive control for marine current turbine generator system

Joint estimation of battery state-of-charge and state-of-health based on a simplified pseudo-two-dimensional model

Linearity Decomposition-Based Cointegration Analysis for Nonlinear and Nonstationary Process Performance Assessment

Model Migration Neural Network for Predicting Battery Aging Trajectories

Multiphase two-dimensional time-slice dynamic system for batch process monitoring

Nonlinear Process Quality Prediction Using Wavelet Denoising OSC-SVM-PLS

Run-To-Run Control for Active Balancing of Lithium Iron Phosphate Battery Packs

Synthesis of ILC-MPC controller with data-driven approach for constrained batch processes

Iterative learning stabilization and fault-tolerant control for batch processes

110th Anniversary: An Overview on Learning-Based Model Predictive Control for Batch Processes

2D Switched Model-Based Infinite Horizon LQ Fault-Tolerant Tracking Control for Batch Process

A novel framework for Lithium-ion battery modeling considering uncertainties of temperature and aging

Aging trajectory prediction for lithium-ion batteries via model migration and Bayesian Monte Carlo method

Batch Process Modeling and Monitoring With Local Outlier Factor

Education in Process Systems Engineering: Why It Matters More Than Ever and How It Can Be Structured

Incipient Fault Detection for Multiphase Batch Processes with Limited Batches

Load-responsive model switching estimation for state of charge of lithium-ion batteries

Model migration based battery power capability evaluation considering uncertainties of temperature and aging

Multiobjective Two-Dimensional CCA-Based Monitoring for Successive Batch Processes with Industrial Injection Molding Application

Multipoint Iterative Learning Mode Predictive Control

Multivariate Statistical Monitoring of Key Operation Units of Batch Processes Based on Time-Slice CCA

Nonlinear Multivariate Quality Prediction Based on OSC-SVM-PLS

Performance-relevant kernel independent component analysis based operating performance assessment for nonlinear and non-Gaussian industrial processes

PI Based Indirect-Type Iterative Learning Control for Batch Processes with Time-Varying Uncertainties: A 2D FM Model Based Approach

Real-time aging trajectory prediction using a base model-oriented gradient-correction particle filter for Lithium-ion batteries

多阶段间歇过程无穷时域优化线性二次容错控制

多階段間歇過程無窮時域優化線性二次容錯控制

Model Predictive Control: Approaches Based on the Extended State Space Model and Extended Non-minimal State Space Model

A Polytopic Invariant Set Based Iterative Learning Model Predictive Control

Battery State of Charge Estimation Based on a Pure Hardware Implementable Method

Predicting Battery Aging Trajectory via a Migrated Aging Model and Bayesian Monte Carlo Method

A fast estimation algorithm for lithium-ion battery state of health

A hybrid 2D fault-tolerant controller design for multi-phase batch processes with time delay

A Systematic Min-Max Optimization Design of Constrained Model Predictive Tracking Control for Industrial Processes against Uncertainty

An Automatic Glucose Monitoring Signal Denoising Method With Noise Level Estimation and Responsive Filter Updating

An incremental Inter-agent learning method for adaptive control of multiple identical processes in mass production

An Intelligent Non-optimality Self-recovery Method Based on Reinforcement Learning With Small Data in Big Data Era

Data Driven Modeling Using an Optimal Principle Component Analysis Based Neural Network and Its Application to a Nonlinear Coke Furnace

Delay-Range-Dependent-Based Hybrid Iterative Learning Fault-Tolerant Guaranteed Cost Control for Multiphase Batch Processes

Design of Fuzzy Iterative Learning Fault-tolerant Control for Batch Processes with Time-varying Delays

Gaussian Process Regression and Bayesian Inference Based Operating Performance Assessment for Multiphase Batch Processes

Genetic-Algorithm-Optimization-Based Infinite Horizon Linear Quadratic Control for Injection Molding Batch Processes with Uncertainty

Guaranteed Cost Iterative Learning Control for Multi-Phase Batch Processes

Hierarchical multiblock T-PLS based operating performance assessment for plant-wide processes

Hybrid Iterative Learning Fault-tolerant Guaranteed Cost Control Design for Multi-phase Batch Processes

Improved Nonlinear Quality Estimation for Multiphase Batch Processes Based on Relevance Vector Machine with Neighborhood Component Variable Selection

Inner-phase and inter-phase analysis based operating performance assessment and nonoptimal cause identification for multiphase batch processes

Linearity Evaluation and Variable Subset Partition Based Hierarchical Process Modeling and Monitoring

Long-term battery voltage, power, and surface temperature prediction using a model-based extreme learning machine

Mixed-effects Gaussian Process Modeling Approach With Application in Injection Molding Processes

Monitoring big process data of industrial plants with multiple operating modes based on hadoop

Multimodel fractional predictive functional control design with application on an industrial heating furnace

Nonlinear Monotonically Convergent Iterative Learning Control for Batch Processes

Online Average-based System Modelling Method for Batch Process

Review and big data perspectives on robust data mining approaches for industrial process modeling with outliers and missing data

Robust Iterative Learning Control for Multi-phase Batch Processes: An Average Dwell-time Method with 2D Convergence Indexes

Similar batch process monitoring with orthogonal subspace alignment

Transfer of Qualitative and Quantitative Knowledge for Similar Batch Process Monitoring

Two-directional concurrent strategy of mode identification and sequential phase division for multimode and multiphase batch process monitoring with uneven lengths

半间歇化学反应过程的二维迭代学习PI控制方法

A Tube Feedback Iterative Learning Control for Batch Processes

2D Multi-model General Predictive Iterative Learning Control for Semi-batch Reactor with Multiple Reactions

A Sparse Dissimilarity Analysis Algorithm for Incipient Fault Isolation with No Priori Fault Information

A Sparse Reconstruction Strategy for Online Fault Diagnosis in Nonstationary Processes with No a Priori Fault Information

An improved approach for H-infinity design of linear quadratic tracking control for chemical processes with partial actuator failure

An Indirect Data-Driven Method for Trajectory Tracking Control of a Class of Nonlinear Discrete-Time Systems

Critical-to-Fault-Degradation Variable Analysis and Direction Extraction for Online Fault Prognostic

Design of Fractional Order Modeling Based Extended Non-Minimal State Space MPC for Temperature in an Industrial Electric Heating Furnace

Fractional Order MPC Design Using Improved State Space Model

Fuzzy Iterative Learning Control for Batch Processes with Interval Time-Varying Delays

Improved Design of Constrained Model Predictive Tracking Control for Batch Processes Against Unknown Uncertainties

Iterative Learning and Extremum Seeking for Repetitive Time-Varying Mappings

Iterative Learning Fault-tolerant Control for Injection Molding Processes Against Actuator Faults

Iterative Learning Fault-Tolerant Control for Networked Batch Processes with Multirate Sampling and Quantization Effects

LQG Benchmark Based Performance Assessment of IMC-PID Temperature Control System

Multimode and Multiphase Batch Processes Understanding and Monitoring Based on Between-Mode Similarity Evaluation and Multimode Discriminative Information Analysis

Observer Based Battery SOC Estimation: Using Multi-gain-switching Approach

Robust Iterative Learning Fault-Tolerant Control for Multiphase Batch Processes with Uncertainties

State Space Model Predictive Control for Advanced Process Operation: A Review of Recent Development, New Results, and Insight

Subspace Decomposition and Critical Phase Selection Based Cumulative Quality Analysis for Multiphase Batch Processes

基于T-S模糊模型的間歇過程的迭代學習容錯控制

批次过程控制-回顾与展望

A Multi-objective Model Predictive Control for Temperature Control in Extrusion Processes

A Reconstruction Strategy for Fault Diagnosis Based on Fault Direction

Phase-based Recursive Regression For Quality Prediction of Multiphase Batch Processes

Sparse Dissimilarity Analysis Based on Distribution Dissimilarity Decomposition for Online Diagnosis of Incipient Faults

State of Charge Estimation of LiFePO₄ Battery Based on a Gain-classifier Observer

Subspace decomposition based cumulative quality analysis for multiphase batch processes

A New Approach of Takagi-Sugeno Fuzzy Modeling Using an Improved Genetic Algorithm Optimization for Oxygen Content in a Coke Furnace

Adaptive Output Trajectory Tracking Control for a Class of Affine Nonlinear Discrete-Time Systems

An Iterative Two-Step Sequential Phase Partition (ITSPP) Method for Batch Process Modeling and Online Monitoring

Discrete-Time Robust Iterative Learning Kalman Filtering for Repetitive Processes

Ellipsoid invariant set-based robust model predictive control for repetitive processes with constraints

Fault Subspace Selection Approach Combined With Analysis of Relative Changes for Reconstruction Modeling and Multifault Diagnosis

Integrated Design Method of a Cascade Iterative Learning Control for the Cascaded Batch/Repetitive Processes

Iterative Learning Kalman Filter for Repetitive Processes

New Minmax Linear Quadratic Fault-Tolerant Tracking Control for Batch Processes

Online identification for batch processes in closed loop incorporating priori controller knowledge

Phase adaptive RVM model for quality prediction of multiphase batch processes with limited modeling batches

Prediction of Human Promoter with Least Square Support Vector Machine based on Kernel Locality Preserving Projection

Priori Knowledge-Based Online Batch-to-Batch Identification in a Closed Loop and an Application to Injection Molding

Probabilistic Fault Diagnosis Based on Monte Carlo and Nested-Loop Fisher Discriminant Analysis for Industrial Processes

State-of-Charge Estimation for Li-Ion Power Batteries Based on a Tuning Free Observer

Synthesis of Real-Time-Feedback-Based 2D Iterative Learning Control Model Predictive Control for Constrained Batch Processes with Unknown Input Nonlinearity

The robust model predictive control based on mixed H₂/H_∞ approach with separated performance formulations and its ISpS analysis

Two-time dimensional recursive system identification incorporating priori pole and zero knowledge

注塑過程中注射保壓階段最小運行時間控制方法

集成神经网络与自适应算法的分数阶滑模控制

Injection Molding Process Control, Monitoring, and Optimization

间歇过程的过程建模与参数控制

Feedback Control Algorithms Developed for Continuous Processes

Injection Molding: Background

In-Mold Capacitive Transducer for Injection Molding Process

Learning Type Control for the Injection Molding Process

Parameter Setting for the Plastication Stage

Phase-Based Quality Improvement Strategies

Phase-Based SPM Strategies

Profile Setting of Injection Velocity

Profile Setting of Packing Pressure

Statistical Process Monitoring (SPM) of Injection Molding: Basics

Two-Dimensional Control Algorithms

‘State Déjà vu’ Inter-Agent Learning Adaptive Control Framework

Product Quality Control for Single Screw Extrusion Process

Stability Evaluation based Non-steady Variable Identification for Online Fault Prognosis

A nested-loop Fisher discriminant analysis algorithm

A two-stage design of two-dimensional model predictive iterative learning control for nonrepetitive disturbance attenuation

An improved decoupling structure based state space MPC design with improved performance

An Iterative Modeling and Trust-Region Optimization Method for Batch Processes

Application of Two-Dimensional Predictive Functional Control in Injection Molding

Bayesian improved model migration methodology for fast process modeling by incorporating prior information

Comprehensive Subspace Decomposition with Analysis of Between-Mode Relative Changes for Multimode Process Monitoring

Cost-effective process modeling and optimization methodology assisted by robust migration techniques

Delay-range dependent H∞control for uncertain 2D-delayed systems

Design of state space linear quadratic tracking control using GA optimization for batch processes with partial actuator failure

Improved infinite horizon LQ tracking control for injection molding process against partial actuator failures

Iterative improvement of parameter estimation for model migration by means of sequential experiments

Online fault prognosis with relative deviation analysis and vector autoregressive modeling

Process control of reinforcement corrosion in concrete. Part 1: Effect of corrosion products

Sequential Time Slice Alignment Based Unequal-Length Phase Identification and Modeling for Fault Detection of Irregular Batches

State-Space Predictive-P Control for Liquid Level in an Industrial Coke Fractionation Tower

Two-time-dimensional model predictive control of weld line positioning in bi-injection molding

基于时序模型迁移的间歇过程监测建模方法

A fast and effective 2D regulatory control for injection molding process

A MPC Operation Method for a Photovoltaic System with Batteries

A Stable Two-Time Dimensional (2D) Model Predictive Control with Zero Terminal State Constraints for Constrained Batch Processes

A Variant Fisher Discriminant Analysis Algorithm and its Applicationto Fault Diagnosis

An information technology way for uplifting polymer processing efficiency

An Information Technology Way for Uplifting Polymer Processing Efficiency

Integrated Optimization Based on Transition Tracking Analysis for Batch Processes

Model Migration through Bayesian Adjustments

Multi-stage Process Analysis and Modelling based Online Monitoring for Chip Packaging Process

Between-Mode Quality Analysis Based Multimode Batch Process Quality Prediction

Comparison of Two Types of Control Structures for Benzene Chlorine Reactive Distillation Systems

Constrained two dimensional recursive least squares model identification for batch processes

Design and implementation of an improved linear quadratic regulation control for oxygen content in a coke furnace

Design of dynamic matrix control based PID for residual oil outlet temperature in a coke furnace

Fault-relevant Principal Component Analysis (FPCA) method for multivariate statistical modeling and process monitoring

GA based predictive functional control for batch processes under actuator faults

Improved PI controller based on predictive functional control for liquid level regulation in a coke fractionation tower

Inter-batch-evolution-traced process monitoring based on inter-batch mode division for multiphase batch processes

New PID Controller Design Using Extended Nonminimal State Space Model Based Predictive Functional Control Structure

Predictive control optimization based PID control for temperature in an industrial surfactant reactor

Predictive Functional Control for Linear Systems under Partial Actuator Faults and Application on an Injection Molding Batch Process

Real-time implementation of improved state-space MPC for air supply in a coke furnace

Regression modeling and quality prediction for multiphase batch processes with inner-phase analysis

Separated design of robust model predictive control for LPV systems with periodic disturbance

State space model predictive fault-tolerant control for batch processes with partial actuator failure

Statistical modeling and online fault detection for multiphase batch processes with analysis of between-phase relative changes

Temperature control of industrial coke furnace using novel state space model predictive control

Temperature Modeling in a Coke Furnace with an Improved RNA-GA Based RBF Network

Two-level PLS model for quality prediction of multiphase batch processes

A Fast 2D Predictive Control Algorithm for Injection Molding process

A Repetitiveness Index-based Adaptive Two Dimensional Iterative Learning Model Predictive Control

A two-dimensional iterative learning model predictive control method for injection molding based on mixed integer quadratic programming

Batch process control: from continuous approaches to 2D methods

Batch Process Control: from continuous approaches to 2-time dimensional control

Control in Polymer Processing for Key Processes and Their Peripherals

Delay-range-dependent robust BIBO stabilization of 2D discrete delayed systems via LMI approach

Development of a capacitive transducer for dimensions prediction in polymer extrusion

Energy-Saving Based Allocated Generalized Predictive Control (AGPC) in Extrusion Process

From single batch process control to multiple batch processes control: A review and a perspective for injection molding

Intra-Batch Evolution Based Process Monitoring for Multiphase Batch Processes

Iterative optimization for batch processes through online modeling

Model Migration Based on Subspace Separation for Development of a New Process Monitoring Model

Monitoring of Polymer Processing Processes and Technology

Two dimensional predictive functional control for injection molding process

Two-Time Dimensional Hybrid Dynamic Matrix Control for Injection Molding Process

注塑机控制的智能化发展

An LMI Method to Robust Iterative Learning Fault-tolerant Guaranteed Cost Control for Batch Processes

Between‐phase calibration modeling and transition analysis for phase‐based quality interpretation and prediction

Control and Profile Setting of Reactive Distillation Column for Benzene Chloride Consecutive Reaction System

Delay-range-dependent guaranteed cost control for batch processes with state delay

Delay-Range-Dependent Method for Iterative Learning Fault-Tolerant Guaranteed Cost Control for Batch Processes

Delay-range-dependent robust 2D iterative learning control for batch processes with state delay and uncertainties

H∞ design of 2D controller for batch processes with uncertainties and interval time-varying delays

Incorporating Setting Information for Maintenance-Free Quality Modeling of Batch Processes

Information-Transfer PLS Model for Quality Prediction in Transition Periods of Batch Processes

Inner-Phase Analysis Based Statistical Modeling and Online Monitoring for Uneven Multiphase Batch Processes

Multiset Independent Component Regression (MsICR) Based Statistical Data Analysis and Calibration Modeling

Multivariable decoupling predictive functional control with non-zero-pole cancellation and state weighting: Application on chamber pressure in a coke furnace

New design of state space linear quadratic fault-tolerant tracking control for batch processes with partial actuator failure

Optimal Iterative Learning Control Based on a Time-Parametrized Linear Time-Varying Model for Batch Processes

Review of Recent Research on Data-Based Process Monitoring

Self-Training Statistical Quality Prediction of Batch Processes with Limited Quality Data

State Space Model Predictive Control Using Partial Decoupling and Output Weighting for Improved Model/Plant Mismatch Performance

Subspace Decomposition-Based Reconstruction Modeling for Fault Diagnosis in Multiphase Batch Processes

Synthesis of Dynamic Output Feedback RMPC with Saturated Inputs

Treatment of Restaurant Wastewater by Pilot-Scale Electrocoagulation-Electroflotation: Optimization of Operating Conditions

基于2維性能參考模型的2維模型預測迭代學習控制策略

迭代学习控制的二维模型理论及其应用

Feedback Control

A PID-type Model Predictive Iterative Learning Control for Injection Molding Process

From One Dimensional to Two Dimensional Hybrid Control of Injection Molding Process

Injection Molding: From Single Machine to Plant-Wide Intelligent Control

Inner-Phase-Evolution-Traced Statistical Modeling and Online Monitoring for Uneven Batch Processes

New Approaches of 2D Recursive Least Squares System Identification for Batch Processes

Quality-related Inner-phase Evolution Analysis and Quality Prediction for Uneven Batch Processes

Quality-relevant Fault Diagnosis with Concurrent Phase Partition and Analysis of Relative Changes for Multiphase Batch Processes

Rejection of Periodic Disturbances Based on Adaptive Repetitive Model Predictive Control

Two Dimensional Recursive Least Squares for Batch Processes System Identification

4th Symposium on advanced control of industrial processes (Adconip)

A multiple-time-region (MTR)-based fault subspace decomposition and reconstruction modeling strategy for online fault diagnosis

Between-phase-based statistical analysis and modeling for transition monitoring in multiphase batch processes

Multiple Local Reconstruction Model-based Fault Diagnosis for Continuous Processes

Multivariate statistical monitoring of multiphase batch processes with between-phase transitions and uneven operation durations

Nonlinear quality prediction for multiphase batch processes

Overall Control System for Injection Molding Process

Partially Decoupled Approach of Extended Non-minimal State Space Predictive Functional Control for MIMO Processes

Phase analysis and identification method for multiphase batch processes with partitioning multi-way principal component analysis (MPCA) model

Phase Transition Analysis Based Quality Prediction for Multi-phase Batch Processes

Polymer Extrusion: From Control System Design to Product Quality

Robust delay dependent iterative learning fault-tolerant control for batch processes with state delay and actuator failures

Spectra calibration modeling and statistical analysis for cumulative quality interpretation and prediction

Statistical modeling and online monitoring based on between-set regression analysis

Statistical Prediction of Product Quality in Batch Processes with Limited Batch-Cycle Data

Two-step multiset regression analysis (MsRA) algorithm

Two-time dimensional dynamic matrix control for batch processes with convergence analysis against the 2D interval uncertainty

Utilizing transition information in online quality prediction of multiphase batch processes

Wastewater Quality Monitoring System Using Sensor Fusion and Machine Learning Techniques

Industrial Process Identification and Control Design: Step-test and Relay-experiment-based Methods

Batch process control

Cascade control system

Concluding Remarks

Control of single-input-single-output (SISO) processes

Decoupling control of multivariable processes

Direct Quality Control

Learning Control

Multiloop control of multivariable processes

Multivariate Statistical Process Control

Relay feedback identification of integrating processes

Relay feedback identification of stable processes

Relay Feedback Identification of Unstable Processes

Step response identification of integrating and unstable processes

Step response identification of stable processes

Two-degrees-of-freedom (2DOF) control of SISO processes

Application of Advanced Control Algorithms in Injection Molding

Batch Process Control, From Traditional Approaches to 2D Control

Between-phase transition analysis for phase-based quality prediction

Injection velocity control using 2D model predictive iterative learning algorithm

Intelligent Injection Molding Control System With Multivariate Statistical Quality Monitoring

Multivariate statistical analysis methods to investigate interindividual glucose dynamics for subjects with type 1 diabetes mellitus

Polymer extrusion control system design

Robust iterative learning control with quadratic performance index

A Bidirectional Between-Set Statistical Analysis Method and Its Applications

A two-step basis vector extraction strategy for multiset variable correlation analysis

Batch process monitoring based on support vector data description method

Bayesian migration of Gaussian process regression for rapid process modeling and optimization

Enhanced IMC design of load disturbance rejection for integrating and unstable processes with slow dynamics

Enhanced Process Comprehension and Quality Analysis Based on Subspace Separation for Multiphase Batch Processes

Mixture probabilistic PCR model for soft sensing of multimode processes

Multiphase calibration modeling and quality interpretation by priority sorting

Optimal structure of learning-type set-point in various set-point-related indirect ilc algorithms

Quality Control via Model-Free Optimization for a Type of Batch Process with a Short Cycle Time and Low Operational Cost

Robust design of feedback integrated with iterative learning control for batch processes with uncertainties and interval time-varying delays

Spectra Data Analysis and Calibration Modeling Method Using Spectra Subspace Separation and Multiblock Independent Component Regression Strategy

Statistical analysis and online monitoring for handling multiphase batch processes with varying durations

Two-dimensional Bayesian monitoring method for nonlinear multimode processes

GPC control of hot-runner temperature in injection molding

Improved two-dimensional dynamic batch process monitoring with support vector data description

Multivariate statistical monitoring of multiphase batch processes with uneven operation durations

A frequency domain step response identification method for continuous-time processes with time delay

A novel mechatronic design of a 3D laser scanning system

A Robust Calibration Modeling Strategy for Analysis of Interference-Subject Spectral Data

An Improved Independent Component Regression Modeling and Quantitative Calibration Procedure

Automatic Velocity Profile Determination for Uniform Filling in Injection Molding

Closed-loop step response identification of integrating and unstable processes

Effects of the geometry and operating temperature on the stability of Ti/IrO2-SnO2-Sb2O5 electrodes for O-2 evolution

IMC-based iterative learning control for batch processes with uncertain time delay

Multiblock-Based Qualitative and Quantitative Spectral Calibration Analysis

Multi-objective optimization and selection for the PI control of ALSTOM gasifier problem

Multivariate statistical monitoring of two-dimensional dynamic batch processes utilizing non-Gaussian information

New insight into internal model control filter design for load disturbance rejection

Phase-Based Joint Modeling and Spectroscopy Analysis for Batch Processes Monitoring

Robust two-dimensional iterative learning control for batch processes with state delay and time-varying uncertainties

Statistical analysis and online monitoring for multimode processes with between-mode transitions

Statistical Monitoring and Fault Diagnosis of Batch Processes Using Two-Dimensional Dynamic Information

Step response identification under inherent-type load disturbance with application to injection molding

基于时段的间歇过程统计建模、在线监测及质量预报

Advanced Process Identification and Control

Control System for Injection Molding Process

Design of an advanced injection molding control system

Enhanced IMC-based load disturbance rejection design for integrating processes with slow dynamics

Extruder Temperature Control Using Multivariable Generalized Predictive Control

FASTER PROCESS STABILIZATION FOR INJECTION MOLDING BY AUTOMATIC PROFILING OF PLASTICATION ROTATION SPEED

Improved phase-based calibration modelling and quality prediction by investigating the effects of inter-phase correlation

INJECTION MOLDING PROCESS CONTROL USING 2D MODEL PREDICTIVE ITERATIVE LEARNING ALGORITHM

Injection molding process monitoring and control

On-line in-mold transducer in injection molding

The applications of multivariate statistical methods in injection molding process monitoring

A generalized relay identification method for time delay and non-minimum phase processes

A survey on multistage/multiphase statistical modeling methods for batch processes

Batch-to-Batch Steady State Identification Based on Variable Correlation and Mahalanobis Distance

Covariance-oriented qualitative and quantitative calibration analysis for multistage batch processes

Generalized predictive control of linear systems with actuator arrearage faults

Identification and Autotuning of Temperature-Control System With Application to Injection Molding

Improved calibration investigation using phase-wise local and cumulative quality interpretation and prediction

In-mold Melt Front Rate Control Using a Capacitive Transducer in Injection Molding

Model Migration for Development of a New Process Model

Multivariate statistical monitoring of multiphase two-dimensional dynamic batch processes

Nonlinear Batch Process Monitoring Using Phase-Based Kernel-Independent Component Analysis-Principal Component Analysis (KICA-PCA)

Phase and transition based batch process modeling and online monitoring

Process Similarity and Developing New Process Models Through Migration

Survey on iterative learning control, repetitive control, and run-to-run control

Two-Dimensional Dynamic Principal Component Analysis with Autodetermined Support Region

Injection Molding Control

A design framework for iterative learning control (ILC) based on 2-dimensional model predictive control (2D-MPC)

An improved statistical modeling strategy by spectroscopy for online monitoring and diagnosis of batch processes

Batch process control from practice to 2D model predictive control

Batch Process Monitoring and Fault Diagnosis Based on Multi-Time-Scale Dynamic PCA Models

Development of Wastewater Quality Monitoring System Using Sensor Fusion And Machine Learning Techniques

Fault-tolerant control for batch processes - Overview and outlook

Identification of low-order process model with time delay from closed-loop step test

Identification of low-order unstable process model from closed-loop step test

Identification of time delay model for integrating processes from closed-loop step test

Improved independent component regression modeling

Iterative learning control of mold-open position in injection molding

A systematic approach for on-line identification of second-order process model from relay feedback test

Alternative identification algorithms for obtaining a first-order stable/unstable process model from a single relay feedback test

Barrel temperature control during operation transition in injection molding

Development of a transducer for in-line and through cycle monitoring of key process and quality variables in injection molding

Enhanced Process Comprehension and Statistical Analysis for Slow-Varying Batch Processes

Identification of integrating and unstable processes from relay feedback

Injection Molding Control: From Single Cycle to Batch Control

Iterative learning model predictive control for multi-phase batch processes

Iterative learning reliable control of batch processes with sensor faults

Model Migration with Inclusive Similarity for Development of a New Process Model

Process Modeling based on process similarity

Robust Step-Like Identification of Low-Order Process Model Under Nonzero Initial Conditions and Disturbance

Subspace identification for two-dimensional dynamic batch process statistical monitoring

Variable structure control for a class of nonlinear systems with mismatched uncertainties

An intelligent profiling strategy of injection velocity for uniform cavity filling based on recurrent neural network model

Barrel Temperature Control in Injection Moulding Process

Injection moulding control and optimization: from applied research to academic research

Multi-phase batch process monitoring

Relay-Based Autotuning of PID Controller for Improved Load Disturbance Rejection

Stage-Oriented Statistical Batch Processes Monitoring, Quality Prediction and Improvement

Active fault-tolerant control of nonlinear batch processes with sensor faults

Adaptive monitoring method for batch processes based on phase dissimilarity updating with limited modeling data

Analytical decoupling control strategy using a unity feedback control structure for MIMO processes with time delays

Analytical two-degrees-of-freedom (2-DOF) decoupling control scheme for multiple-input-multiple-output (MIMO) processes with time delays

Application of a capacitive transducer for online part weight prediction and fault detection in injection molding

Batch process monitoring in score space of two-dimensional dynamic principal component analysis (PCA)

Optimal start-up control of injection molding barrel temperature

Optimization of decentralized PI/PID controllers based on genetic algorithm

Robust fault-tolerant control of a class of non-minimum phase nonlinear processes

Single-cycle and multi-cycle generalized 2D model predictive iterative learning control (2D-GPILC) schemes for batch processes

新型注塑螺杆性能研究

Batch Process Modeling Based on Process Similarity

Control of Multi-Phase Batch Processes: Formulation and Challenge

Electrocoagulation and Electroflotation of Restaurant Wastewater – Pilot Plant Study

Higher-Order Generalized 2D Predictive Iterative Learning Control Schemes

Two-Dimensional Dynamic PCA with Auto-Selected Support Region

From two-dimensional linear quadratic optimal control to iterative learning control. Paper 1. Two-dimensional linear quadratic optimal controls and system analysis

From two-dimensional linear quadratic optimal control to iterative learning control. Paper 2. Iterative learning controls for batch processes

Injection molding product weight: Online prediction and control based on a nonlinear principal component regression model

Iterative learning fault-tolerant control for batch processes

Kernel classifier with adaptive structure and fixed memory for process diagnosis

Profiling of injection velocity for uniform mold filling

Robust fault detection and isolation for uncertain linear retarded systems

Robust iterative learning control design for batch processes with uncertain perturbations and initialization

Stage-based online quality control for batch processes

Statistical modeling and online monitoring for batch processes

间歇过程的统计建模与在线监测

2D MODEL PREDICTIVE ITERATIVE LEARNING CONTROL SCHEMES FOR BATCH PROCESSES

Development of A Capacitive Sensor for Injection Molding

Injection Molding Control & Monitoring

INJECTION VELOCITY CONTROL BASED-ON AN ITERATIVE LEARNING AND FEEDBACK COMBINED CONTROLLER

Process/Quality Monitoring of Injection Molding Process using Capacitive Transducer

PRODUCT DESIGN VIA PLS MODELING: STEPPING OUT OF HISTORICAL DATA INTO UNKNOWN OPERATING SPACE

注射成型用高性价比傳感器

Comparison of Ti/BDD and Ti/SnO2-Sb2O5 electrodes for pollutant oxidation

Effect of dielectric material on microwave freeze drying of skim milk

Integrated design and structure analysis of robust iterative learning control system based on a two-dimensional model

MADDOCK注塑螺杆性能研究

On-line detection of the gate freezing-off time for injection molding

Robust design of integrated feedback and iterative learning control of a batch process based on a 2D Roesser system

Stage-based process analysis and quality prediction for batch processes

Two-dimensional dynamic PCA for batch process monitoring

注射成型塑化过程的可视化实验研究

间歇过程滑动窗口子时段PCA建模和在线监测

塑料成型过程控制

Adaptive GPC control of barrel temperatures in injection molding

In-Mold Monitoring of Injection using capacitive transducer

On-line check-ring failure detection and compensation in injection molding

Part weight prediction using capacitive transducer in injection molding

Part Weight Prediction Using Captive Transduer in Injection Molding

Prospective of Injection Molding Control and Monitoring

基于在線測量技術的注塑成型塑化系統研究

基于在线测量技术的注塑成型塑化系统研究

注塑成型中的熔体温度均匀性研究

注塑成型塑化过程的可视化研究

A soft-sensor development for melt-flow-length measurement during injection mold filling

An experimental study of solid-bed break-up in plasticization of a reciprocating-screw injection molding

Capacitive transducer for in-mold monitoring of injection molding

Multirate dynamic inferential modeling for multivariable processes

PCA-based modeling and on-line monitoring strategy for uneven-length batch processes

Sub-PCA modeling and on-line monitoring strategy for batch processes

Advanced Control of Chemical Processes

Advanced Control of Chemical Processes: A Proceedings Volume from the 7th IFAC International Symposium (ADCHEM), Hong Kong, China, 11-14 January 2004

Advanced Control of Chemical Processes: A Proceedings Volume from the 7th IFAC International Symposium (ADCHEM), Hong Kong, China, 11-14 January 2004

A FAULT DIAGNOSIS METHOD FOR FERMENTATION PROCESS

A ROBUST ITERATIVE LEARNING CONTROL WITH NEURAL NETWORKS FOR ROBOT

A stage-based monitoring method for batch process with minimal reference data

Robust Stable Adaptive Control Of Uncertain Bilinear Plants And Application For Distillation Column

Setting of Injection Velocity Profile via an Iterative Learning Control Approach

SOFT-SENSING OF THE DRY POINT OF BENZENE USING PCA AND DRBFN

Stage-Based Multivariate Statistical Analysis for Injection Molding

Within Cycle Prediction of Injection Molding Product Weight Control based on Principal Component Regression

A study of packing profile on injection molded part quality

Combination method of principal component and wavelet analysis for multivariate process monitoring and fault diagnosis

High-performance Ti/BDD electrodes for pollutant oxidation

Robust Stability of Optimal Iterative Learning Control and Application to Injection Molding Machine

塑料注射成型熔融过程中的固相破碎现象

注射成型中的熔体温度均匀性研究

注射成型塑化过程的可视化研究

A Fault Accomodation Control for Nonlinear Processes

Injection Molding Control: Challenge and Prospective

Multi-PCA Models for Process Monitoring and Fault Diagnosis

Robust Stable Adaptive Control of Uncertain Bilinear Plants and Application for Distillation Column

Setting of Injection Molding Packing profile

Setting of Injection Velocity Profile via an Iterative Learning Control Approach

Stage-Based Multivariate Statistical Analysis for Injection Molding

Bound estimation for solutions of a class of delay differential inequalities

Output feedback guaranteed cost control for uncertain discrete-time systems using linear matrix inequalities

Processing of PC/LCP in situ composites by closed-loop injection molding

基于质量的注塑过程建模方法研究：最优保压压力曲线的设定

注塑过程熔体充填长度的动态神经网络软测量模型

Intelligent Control of Injection Molding Process, a completion report submitted to Moog Japan Ltd.

A control strategy for process with output dynamic nonlinearity

Solid-bed break-up during plastication in injection molding

Analysis and Implementation of the Double-Controller Scheme

Fuzzy multi-model based adaptive predictive control and its application to thermoplastic injection molding

H-infinity and (H)over-bar(infinity) control of retarded systems: a Razumikhin-type approach

Identification and control of nonlinear processes in the presence of unmeasured load disturbances

Optimal guaranteed cost control of discrete-time uncertain systems with both state and input delays

PID-based sliding mode controller for nonlinear processes

Robust iterative learning control with applications to injection molding process

Strategies for injection filling velocity control

Fuzzy modeling for injection molded part quality control

Optimal iterative learning control with uncertain initializations and disturbances

A simple nonlinear controller with diagonal recurrent neural network

A visual barrel system for study of reciprocating screw injection molding

Adaptive control of the filling velocity of thermoplastics injection molding

An analytical predictive control law for a class of nonlinear processes

Improved delay time estimation of RC ladder networks

Mathematical Modeling of a Continuous Galvanizing Annealing Furnace

Neural network approach to predict melt temperature in injection molding processes

Neural network-based optimal iterative controller for nonlinear processes

Predictive control for processes with input dynamic nonlinearity

A Transparent barrel for study of reciprocating screw injection molding

An on-line measurement scheme of melt-front-area during injection filling via a soft-sensor implementation

Guaranteed cost control of uncertain discrete linear time-delay systems

Modelling and control of processes with output dynamic nonlinearity

Robust adaptive control of bilinear plants with high-order perturbation uncertainties

Robust H∞ Control of Discrete-time Linear System with Delayed Sate and Frobenius Norm-bounded Uncertainties

A neural-network-based nonlinear controller using an extended Kalman filter

Control of injection velocity using a fuzzy logic rule-based controller for thermoplastics injection molding

Control of integrator processes with dominant time delay

Criteria for Quantitative Stability for a Class of Razumikhin-type Retarded Functional Differential Equations

Cycle-to-cycle and within-cycle adaptive control of nozzle pressure during packing-holding for thermoplastic injection molding

Evaluation of gas pressure dynamics for gas-assisted injection molding process

Genetic algorithms and evolutionary programming hybrid strategy for structure and weight learning for multilayer feedforward neural networks

Injection velocity control of thermoplastic injection molding via a double controller scheme

Injection velocity control using a self-tuning adaptive controller

Melt temperature profile prediction for thermoplastic injection molding

Stability Criterion for Linear Systems with Nonlinear Delayed Perturbations

A comparison of different strategies for injection filling velocity control

A double-controller scheme for controlling dominant delay processes

Adaptive Control of Injection Velocity of Thermoplastics Injection Molding

Adaptive Model Predictive Control of Filling Velocity of Thermoplastics Injection Molding

Control of Integrator Processes with Long Dead-Time

Injection Molding of Liquid Crystalline Polymers Reinforced Polycarbonate

Neural Networks Prediction of Melt Temperatures at Plastication Phase

On-line Prediction of Melt Temperature at Injection Nozzle Exit Using Neural Networks

Predictive Control with Neuro-compensation for a Class of Nonlinear Processes

Adaptive control of chaotic continuous-time systems with delay

Adaptive control of nozzle melt packing pressure

Compensation of dominant and variable delay in process systems

Double-controller scheme for control of processes with dominant delay

Double-controller scheme for separating load rejection from set-point tracking

Adaptive Control of Injection Velocity and Packing Pressure of Thermoplastics Injection Molding, A final Report to Moog Japan Ltd.

A Fuzzy Logic Controller for Injection Ram Velocity

Adaptive Control of Nozzle Melt Packing Pressure

An Experimental Analysis of Injection Molding Melt Temperature

射出成形におけるファヅィ理論を用いた自動保壓切換

Extraction of delay information from chaotic time series based on information entropy

Injection Molding Control

A Real-time Fuzzy Logic Controller for Ram Velocity in Injection Molding

Complicated Dynamics in Simple Delay Systems

Multi-variable interaction analysis and a proposed quality control system for thermoplastics injection molding

Simple delay systems with chaotic dynamics

Cavity pressure control during the cooling stage in thermoplastic injection molding

Cavity Pressure Dynamics and Self-tuning Control for Filling and Packing Phases of Thermoplastics Injection Molding

Adaptive Control of Cavity Pressure During Filling

Cavity Pressure Adaptive Control for Thermoplastics Injection Molding

Self‐tuning cavity pressure control of injection molding filling

Cavity Pressure Control during Cooling

Control of Cavity Pressure during Packing, Society of Plastics Engineers

On-line Quality Monitoring Coupling Computer Analysis and Actual Measurement

Dynamics and Control of Surface and Mold Temperatures in Injection Molding

Adaptive Control of Cavity Pressure During Filling, Society of Plastics Engineers

Cavity Pressure Control of Injection Molding Filling

A Versatile Computer Control System for Injection Molding

Mould Temperature Measurement and Control, Society of Plastics Engineers

110th Anniversary: An Overview on Learning-Based Model Predictive Control for Batch Processes

Article

2D Switched Model-Based Infinite Horizon LQ Fault-Tolerant Tracking Control for Batch Process

Article

A novel framework for Lithium-ion battery modeling considering uncertainties of temperature and aging

Article

Aging trajectory prediction for lithium-ion batteries via model migration and Bayesian Monte Carlo method

Article

Batch Process Modeling and Monitoring With Local Outlier Factor

Article

Education in Process Systems Engineering: Why It Matters More Than Ever and How It Can Be Structured

Article

Incipient Fault Detection for Multiphase Batch Processes with Limited Batches

Article

Load-responsive model switching estimation for state of charge of lithium-ion batteries

Article

Model migration based battery power capability evaluation considering uncertainties of temperature and aging

Article

Multiobjective Two-Dimensional CCA-Based Monitoring for Successive Batch Processes with Industrial Injection Molding Application

Article

Multipoint Iterative Learning Mode Predictive Control

Article

Multivariate Statistical Monitoring of Key Operation Units of Batch Processes Based on Time-Slice CCA

Article

Nonlinear Multivariate Quality Prediction Based on OSC-SVM-PLS

Article

Performance-relevant kernel independent component analysis based operating performance assessment for nonlinear and non-Gaussian industrial processes

Article

PI Based Indirect-Type Iterative Learning Control for Batch Processes with Time-Varying Uncertainties: A 2D FM Model Based Approach

Article

Real-time aging trajectory prediction using a base model-oriented gradient-correction particle filter for Lithium-ion batteries

Article

多阶段间歇过程无穷时域优化线性二次容错控制

Article

多階段間歇過程無窮時域優化線性二次容錯控制

Article

Model Predictive Control: Approaches Based on the Extended State Space Model and Extended Non-minimal State Space Model

Book

A Polytopic Invariant Set Based Iterative Learning Model Predictive Control

Conference paper

Battery State of Charge Estimation Based on a Pure Hardware Implementable Method

Conference paper

Predicting Battery Aging Trajectory via a Migrated Aging Model and Bayesian Monte Carlo Method

Conference paper

A fast estimation algorithm for lithium-ion battery state of health

Article

A hybrid 2D fault-tolerant controller design for multi-phase batch processes with time delay

Article

A Systematic Min-Max Optimization Design of Constrained Model Predictive Tracking Control for Industrial Processes against Uncertainty

Article

An Automatic Glucose Monitoring Signal Denoising Method With Noise Level Estimation and Responsive Filter Updating

Article

An incremental Inter-agent learning method for adaptive control of multiple identical processes in mass production

Article

An Intelligent Non-optimality Self-recovery Method Based on Reinforcement Learning With Small Data in Big Data Era

Article

Data Driven Modeling Using an Optimal Principle Component Analysis Based Neural Network and Its Application to a Nonlinear Coke Furnace

Article

Delay-Range-Dependent-Based Hybrid Iterative Learning Fault-Tolerant Guaranteed Cost Control for Multiphase Batch Processes

Article

Design of Fuzzy Iterative Learning Fault-tolerant Control for Batch Processes with Time-varying Delays

Article

Gaussian Process Regression and Bayesian Inference Based Operating Performance Assessment for Multiphase Batch Processes

Article

Genetic-Algorithm-Optimization-Based Infinite Horizon Linear Quadratic Control for Injection Molding Batch Processes with Uncertainty

Article

Guaranteed Cost Iterative Learning Control for Multi-Phase Batch Processes

Article

Hierarchical multiblock T-PLS based operating performance assessment for plant-wide processes

Article

Hybrid Iterative Learning Fault-tolerant Guaranteed Cost Control Design for Multi-phase Batch Processes

Article

Improved Nonlinear Quality Estimation for Multiphase Batch Processes Based on Relevance Vector Machine with Neighborhood Component Variable Selection

Article

Inner-phase and inter-phase analysis based operating performance assessment and nonoptimal cause identification for multiphase batch processes

Article

Linearity Evaluation and Variable Subset Partition Based Hierarchical Process Modeling and Monitoring

Article

Long-term battery voltage, power, and surface temperature prediction using a model-based extreme learning machine

Article

Mixed-effects Gaussian Process Modeling Approach With Application in Injection Molding Processes

Article

Monitoring big process data of industrial plants with multiple operating modes based on hadoop

Article

Multimodel fractional predictive functional control design with application on an industrial heating furnace

Article

Nonlinear Monotonically Convergent Iterative Learning Control for Batch Processes

Article

Online Average-based System Modelling Method for Batch Process

Article

Review and big data perspectives on robust data mining approaches for industrial process modeling with outliers and missing data

Article

Robust Iterative Learning Control for Multi-phase Batch Processes: An Average Dwell-time Method with 2D Convergence Indexes

Article

Similar batch process monitoring with orthogonal subspace alignment

Article

Transfer of Qualitative and Quantitative Knowledge for Similar Batch Process Monitoring

Article

Two-directional concurrent strategy of mode identification and sequential phase division for multimode and multiphase batch process monitoring with uneven lengths

Article

半间歇化学反应过程的二维迭代学习PI控制方法

Article

A Tube Feedback Iterative Learning Control for Batch Processes

Conference paper

2D Multi-model General Predictive Iterative Learning Control for Semi-batch Reactor with Multiple Reactions

Article

A Sparse Dissimilarity Analysis Algorithm for Incipient Fault Isolation with No Priori Fault Information

Article

A Sparse Reconstruction Strategy for Online Fault Diagnosis in Nonstationary Processes with No a Priori Fault Information

Article

An improved approach for H-infinity design of linear quadratic tracking control for chemical processes with partial actuator failure

Article

An Indirect Data-Driven Method for Trajectory Tracking Control of a Class of Nonlinear Discrete-Time Systems

Article

Critical-to-Fault-Degradation Variable Analysis and Direction Extraction for Online Fault Prognostic

Article

Design of Fractional Order Modeling Based Extended Non-Minimal State Space MPC for Temperature in an Industrial Electric Heating Furnace

Article

Fractional Order MPC Design Using Improved State Space Model

Article

Fuzzy Iterative Learning Control for Batch Processes with Interval Time-Varying Delays

Article

Improved Design of Constrained Model Predictive Tracking Control for Batch Processes Against Unknown Uncertainties

Article

Iterative Learning and Extremum Seeking for Repetitive Time-Varying Mappings

Article

Iterative Learning Fault-tolerant Control for Injection Molding Processes Against Actuator Faults

Article

Iterative Learning Fault-Tolerant Control for Networked Batch Processes with Multirate Sampling and Quantization Effects

Article

LQG Benchmark Based Performance Assessment of IMC-PID Temperature Control System

Article

Multimode and Multiphase Batch Processes Understanding and Monitoring Based on Between-Mode Similarity Evaluation and Multimode Discriminative Information Analysis

Article

Observer Based Battery SOC Estimation: Using Multi-gain-switching Approach

Article

Robust Iterative Learning Fault-Tolerant Control for Multiphase Batch Processes with Uncertainties

Article

State Space Model Predictive Control for Advanced Process Operation: A Review of Recent Development, New Results, and Insight

Article

Subspace Decomposition and Critical Phase Selection Based Cumulative Quality Analysis for Multiphase Batch Processes

Article

基于T-S模糊模型的間歇過程的迭代學習容錯控制

Article

批次过程控制-回顾与展望

Article

A Multi-objective Model Predictive Control for Temperature Control in Extrusion Processes

Conference paper

A Reconstruction Strategy for Fault Diagnosis Based on Fault Direction

Conference paper

Phase-based Recursive Regression For Quality Prediction of Multiphase Batch Processes

Conference paper

Sparse Dissimilarity Analysis Based on Distribution Dissimilarity Decomposition for Online Diagnosis of Incipient Faults

Conference paper

State of Charge Estimation of LiFePO₄ Battery Based on a Gain-classifier Observer

Conference paper

Subspace decomposition based cumulative quality analysis for multiphase batch processes

Conference paper

A New Approach of Takagi-Sugeno Fuzzy Modeling Using an Improved Genetic Algorithm Optimization for Oxygen Content in a Coke Furnace

Article

Adaptive Output Trajectory Tracking Control for a Class of Affine Nonlinear Discrete-Time Systems

Article

An Iterative Two-Step Sequential Phase Partition (ITSPP) Method for Batch Process Modeling and Online Monitoring

Article

Discrete-Time Robust Iterative Learning Kalman Filtering for Repetitive Processes

Article

Ellipsoid invariant set-based robust model predictive control for repetitive processes with constraints

Article

Fault Subspace Selection Approach Combined With Analysis of Relative Changes for Reconstruction Modeling and Multifault Diagnosis

Article

Integrated Design Method of a Cascade Iterative Learning Control for the Cascaded Batch/Repetitive Processes

Article

Iterative Learning Kalman Filter for Repetitive Processes

Article

New Minmax Linear Quadratic Fault-Tolerant Tracking Control for Batch Processes

Article

Online identification for batch processes in closed loop incorporating priori controller knowledge

Article

Phase adaptive RVM model for quality prediction of multiphase batch processes with limited modeling batches

Article

Prediction of Human Promoter with Least Square Support Vector Machine based on Kernel Locality Preserving Projection

Article

Priori Knowledge-Based Online Batch-to-Batch Identification in a Closed Loop and an Application to Injection Molding

Article

Probabilistic Fault Diagnosis Based on Monte Carlo and Nested-Loop Fisher Discriminant Analysis for Industrial Processes

Article

State-of-Charge Estimation for Li-Ion Power Batteries Based on a Tuning Free Observer

Article

Synthesis of Real-Time-Feedback-Based 2D Iterative Learning Control Model Predictive Control for Constrained Batch Processes with Unknown Input Nonlinearity

Article

The robust model predictive control based on mixed H₂/H_∞ approach with separated performance formulations and its ISpS analysis

Article

Two-time dimensional recursive system identification incorporating priori pole and zero knowledge

Article

注塑過程中注射保壓階段最小運行時間控制方法

Article

集成神经网络与自适应算法的分数阶滑模控制

Article

Injection Molding Process Control, Monitoring, and Optimization

Book

间歇过程的过程建模与参数控制

Book

Feedback Control Algorithms Developed for Continuous Processes

Book chapter

Injection Molding: Background

Book chapter

In-Mold Capacitive Transducer for Injection Molding Process

Book chapter

Learning Type Control for the Injection Molding Process

Book chapter

Parameter Setting for the Plastication Stage

Book chapter

Phase-Based Quality Improvement Strategies

Book chapter

Phase-Based SPM Strategies

Book chapter

Profile Setting of Injection Velocity

Book chapter

Profile Setting of Packing Pressure

Book chapter

Statistical Process Monitoring (SPM) of Injection Molding: Basics

Book chapter

Two-Dimensional Control Algorithms

Book chapter

‘State Déjà vu’ Inter-Agent Learning Adaptive Control Framework

Conference paper

Product Quality Control for Single Screw Extrusion Process

Conference paper

Stability Evaluation based Non-steady Variable Identification for Online Fault Prognosis

Conference paper

A nested-loop Fisher discriminant analysis algorithm

Article

A two-stage design of two-dimensional model predictive iterative learning control for nonrepetitive disturbance attenuation

Article

An improved decoupling structure based state space MPC design with improved performance

Article

An Iterative Modeling and Trust-Region Optimization Method for Batch Processes

Article

Application of Two-Dimensional Predictive Functional Control in Injection Molding

Article

Bayesian improved model migration methodology for fast process modeling by incorporating prior information

Article

Comprehensive Subspace Decomposition with Analysis of Between-Mode Relative Changes for Multimode Process Monitoring

Article

Cost-effective process modeling and optimization methodology assisted by robust migration techniques

Article

Delay-range dependent H∞control for uncertain 2D-delayed systems

Article

Design of state space linear quadratic tracking control using GA optimization for batch processes with partial actuator failure

Article

Improved infinite horizon LQ tracking control for injection molding process against partial actuator failures

Article

Iterative improvement of parameter estimation for model migration by means of sequential experiments

Article

Online fault prognosis with relative deviation analysis and vector autoregressive modeling

Article

Process control of reinforcement corrosion in concrete. Part 1: Effect of corrosion products

Article

Sequential Time Slice Alignment Based Unequal-Length Phase Identification and Modeling for Fault Detection of Irregular Batches

Article

State-Space Predictive-P Control for Liquid Level in an Industrial Coke Fractionation Tower

Article

Two-time-dimensional model predictive control of weld line positioning in bi-injection molding

Article

基于时序模型迁移的间歇过程监测建模方法

Article

A fast and effective 2D regulatory control for injection molding process

Conference paper

A MPC Operation Method for a Photovoltaic System with Batteries

Conference paper

A Stable Two-Time Dimensional (2D) Model Predictive Control with Zero Terminal State Constraints for Constrained Batch Processes

Conference paper

A Variant Fisher Discriminant Analysis Algorithm and its Applicationto Fault Diagnosis

Conference paper

An information technology way for uplifting polymer processing efficiency

Conference paper

An Information Technology Way for Uplifting Polymer Processing Efficiency

Conference paper

Integrated Optimization Based on Transition Tracking Analysis for Batch Processes

Conference paper

Model Migration through Bayesian Adjustments

Conference paper

Multi-stage Process Analysis and Modelling based Online Monitoring for Chip Packaging Process

Conference paper

Between-Mode Quality Analysis Based Multimode Batch Process Quality Prediction

Article

Comparison of Two Types of Control Structures for Benzene Chlorine Reactive Distillation Systems

Article

Constrained two dimensional recursive least squares model identification for batch processes

Article

Design and implementation of an improved linear quadratic regulation control for oxygen content in a coke furnace

Article

Design of dynamic matrix control based PID for residual oil outlet temperature in a coke furnace

Article

Fault-relevant Principal Component Analysis (FPCA) method for multivariate statistical modeling and process monitoring

Article

GA based predictive functional control for batch processes under actuator faults

Article

Improved PI controller based on predictive functional control for liquid level regulation in a coke fractionation tower

Article

Inter-batch-evolution-traced process monitoring based on inter-batch mode division for multiphase batch processes

Article

New PID Controller Design Using Extended Nonminimal State Space Model Based Predictive Functional Control Structure

Article

Predictive control optimization based PID control for temperature in an industrial surfactant reactor

Article

Predictive Functional Control for Linear Systems under Partial Actuator Faults and Application on an Injection Molding Batch Process

Article

Real-time implementation of improved state-space MPC for air supply in a coke furnace

Article

Regression modeling and quality prediction for multiphase batch processes with inner-phase analysis

Article

Separated design of robust model predictive control for LPV systems with periodic disturbance

Article

State space model predictive fault-tolerant control for batch processes with partial actuator failure

Article

Statistical modeling and online fault detection for multiphase batch processes with analysis of between-phase relative changes

Article

Temperature control of industrial coke furnace using novel state space model predictive control

Article

Temperature Modeling in a Coke Furnace with an Improved RNA-GA Based RBF Network

Article

Two-level PLS model for quality prediction of multiphase batch processes

Article

A Fast 2D Predictive Control Algorithm for Injection Molding process

Conference paper

A Repetitiveness Index-based Adaptive Two Dimensional Iterative Learning Model Predictive Control

Conference paper

A two-dimensional iterative learning model predictive control method for injection molding based on mixed integer quadratic programming

Conference paper

Batch process control: from continuous approaches to 2D methods

Conference paper

Batch Process Control: from continuous approaches to 2-time dimensional control

Conference paper

Control in Polymer Processing for Key Processes and Their Peripherals

Conference paper

Delay-range-dependent robust BIBO stabilization of 2D discrete delayed systems via LMI approach

Conference paper

Development of a capacitive transducer for dimensions prediction in polymer extrusion

Conference paper

Energy-Saving Based Allocated Generalized Predictive Control (AGPC) in Extrusion Process

Conference paper

From single batch process control to multiple batch processes control: A review and a perspective for injection molding

Conference paper

Intra-Batch Evolution Based Process Monitoring for Multiphase Batch Processes

Conference paper

Iterative optimization for batch processes through online modeling

Conference paper

Model Migration Based on Subspace Separation for Development of a New Process Monitoring Model

Conference paper

Monitoring of Polymer Processing Processes and Technology

Conference paper

Two dimensional predictive functional control for injection molding process

Conference paper

Two-Time Dimensional Hybrid Dynamic Matrix Control for Injection Molding Process

Conference paper

注塑机控制的智能化发展

Conference paper

An LMI Method to Robust Iterative Learning Fault-tolerant Guaranteed Cost Control for Batch Processes

Article

Between‐phase calibration modeling and transition analysis for phase‐based quality interpretation and prediction

Article

Control and Profile Setting of Reactive Distillation Column for Benzene Chloride Consecutive Reaction System

Article

Delay-range-dependent guaranteed cost control for batch processes with state delay

Article

Delay-Range-Dependent Method for Iterative Learning Fault-Tolerant Guaranteed Cost Control for Batch Processes

Article

Delay-range-dependent robust 2D iterative learning control for batch processes with state delay and uncertainties

Article

H∞ design of 2D controller for batch processes with uncertainties and interval time-varying delays

Article

Incorporating Setting Information for Maintenance-Free Quality Modeling of Batch Processes

Article

Information-Transfer PLS Model for Quality Prediction in Transition Periods of Batch Processes

Article

Inner-Phase Analysis Based Statistical Modeling and Online Monitoring for Uneven Multiphase Batch Processes

Article

Multiset Independent Component Regression (MsICR) Based Statistical Data Analysis and Calibration Modeling

Article

Multivariable decoupling predictive functional control with non-zero-pole cancellation and state weighting: Application on chamber pressure in a coke furnace

Article

New design of state space linear quadratic fault-tolerant tracking control for batch processes with partial actuator failure

Article

Optimal Iterative Learning Control Based on a Time-Parametrized Linear Time-Varying Model for Batch Processes

Article

Review of Recent Research on Data-Based Process Monitoring

Article

Self-Training Statistical Quality Prediction of Batch Processes with Limited Quality Data

Article

State Space Model Predictive Control Using Partial Decoupling and Output Weighting for Improved Model/Plant Mismatch Performance

Article

Subspace Decomposition-Based Reconstruction Modeling for Fault Diagnosis in Multiphase Batch Processes

Article

Synthesis of Dynamic Output Feedback RMPC with Saturated Inputs

Article

Treatment of Restaurant Wastewater by Pilot-Scale Electrocoagulation-Electroflotation: Optimization of Operating Conditions

Article

基于2維性能參考模型的2維模型預測迭代學習控制策略

Article

迭代学习控制的二维模型理论及其应用

Book

Feedback Control

Book chapter

A PID-type Model Predictive Iterative Learning Control for Injection Molding Process

Conference paper

From One Dimensional to Two Dimensional Hybrid Control of Injection Molding Process

Conference paper

Injection Molding: From Single Machine to Plant-Wide Intelligent Control

Conference paper

Inner-Phase-Evolution-Traced Statistical Modeling and Online Monitoring for Uneven Batch Processes

Conference paper

New Approaches of 2D Recursive Least Squares System Identification for Batch Processes

Conference paper

Quality-related Inner-phase Evolution Analysis and Quality Prediction for Uneven Batch Processes

Conference paper

Quality-relevant Fault Diagnosis with Concurrent Phase Partition and Analysis of Relative Changes for Multiphase Batch Processes

Conference paper

Rejection of Periodic Disturbances Based on Adaptive Repetitive Model Predictive Control

Conference paper

Two Dimensional Recursive Least Squares for Batch Processes System Identification

Conference paper

4th Symposium on advanced control of industrial processes (Adconip)

Article

A multiple-time-region (MTR)-based fault subspace decomposition and reconstruction modeling strategy for online fault diagnosis

Article

Between-phase-based statistical analysis and modeling for transition monitoring in multiphase batch processes

Article

Multiple Local Reconstruction Model-based Fault Diagnosis for Continuous Processes

Article

Multivariate statistical monitoring of multiphase batch processes with between-phase transitions and uneven operation durations

Article

Nonlinear quality prediction for multiphase batch processes

Article

Overall Control System for Injection Molding Process

Article

Partially Decoupled Approach of Extended Non-minimal State Space Predictive Functional Control for MIMO Processes

Article

Phase analysis and identification method for multiphase batch processes with partitioning multi-way principal component analysis (MPCA) model

Article

Phase Transition Analysis Based Quality Prediction for Multi-phase Batch Processes

Article

Polymer Extrusion: From Control System Design to Product Quality

Article

Robust delay dependent iterative learning fault-tolerant control for batch processes with state delay and actuator failures

Article

Spectra calibration modeling and statistical analysis for cumulative quality interpretation and prediction

Article

Statistical modeling and online monitoring based on between-set regression analysis

Article

Statistical Prediction of Product Quality in Batch Processes with Limited Batch-Cycle Data

Article

Two-step multiset regression analysis (MsRA) algorithm

Article

Two-time dimensional dynamic matrix control for batch processes with convergence analysis against the 2D interval uncertainty

Article

Utilizing transition information in online quality prediction of multiphase batch processes

Article

Wastewater Quality Monitoring System Using Sensor Fusion and Machine Learning Techniques

Article

Industrial Process Identification and Control Design: Step-test and Relay-experiment-based Methods

Book

Batch process control

Book chapter

Cascade control system

Book chapter

Concluding Remarks

Book chapter

Control of single-input-single-output (SISO) processes

Book chapter

Decoupling control of multivariable processes

Book chapter

Direct Quality Control

Book chapter

Learning Control

Book chapter

Multiloop control of multivariable processes

Book chapter

Multivariate Statistical Process Control

Book chapter

Relay feedback identification of integrating processes

Book chapter

Relay feedback identification of stable processes

Book chapter

Relay Feedback Identification of Unstable Processes

Book chapter

Step response identification of integrating and unstable processes

Book chapter

Step response identification of stable processes

Book chapter

Two-degrees-of-freedom (2DOF) control of SISO processes

Book chapter

Application of Advanced Control Algorithms in Injection Molding

Conference paper

Batch Process Control, From Traditional Approaches to 2D Control

Conference paper

Between-phase transition analysis for phase-based quality prediction

Conference paper

Injection velocity control using 2D model predictive iterative learning algorithm

Conference paper

Intelligent Injection Molding Control System With Multivariate Statistical Quality Monitoring

Conference paper

Multivariate statistical analysis methods to investigate interindividual glucose dynamics for subjects with type 1 diabetes mellitus

Conference paper

Polymer extrusion control system design

Conference paper

Robust iterative learning control with quadratic performance index

Conference paper

A Bidirectional Between-Set Statistical Analysis Method and Its Applications

Article

A two-step basis vector extraction strategy for multiset variable correlation analysis

Article

Batch process monitoring based on support vector data description method

Article

Bayesian migration of Gaussian process regression for rapid process modeling and optimization

Article

Enhanced IMC design of load disturbance rejection for integrating and unstable processes with slow dynamics

Article

Enhanced Process Comprehension and Quality Analysis Based on Subspace Separation for Multiphase Batch Processes

Article

Mixture probabilistic PCR model for soft sensing of multimode processes

Article

Multiphase calibration modeling and quality interpretation by priority sorting

Article

Optimal structure of learning-type set-point in various set-point-related indirect ilc algorithms

Article

Quality Control via Model-Free Optimization for a Type of Batch Process with a Short Cycle Time and Low Operational Cost

Article

Robust design of feedback integrated with iterative learning control for batch processes with uncertainties and interval time-varying delays

Article

Spectra Data Analysis and Calibration Modeling Method Using Spectra Subspace Separation and Multiblock Independent Component Regression Strategy

Article

Statistical analysis and online monitoring for handling multiphase batch processes with varying durations

Article

Two-dimensional Bayesian monitoring method for nonlinear multimode processes

Article

GPC control of hot-runner temperature in injection molding

Conference paper

Improved two-dimensional dynamic batch process monitoring with support vector data description

Conference paper

Multivariate statistical monitoring of multiphase batch processes with uneven operation durations

Conference paper

A frequency domain step response identification method for continuous-time processes with time delay

Article

A novel mechatronic design of a 3D laser scanning system

Article

A Robust Calibration Modeling Strategy for Analysis of Interference-Subject Spectral Data

Article

An Improved Independent Component Regression Modeling and Quantitative Calibration Procedure

Article

Automatic Velocity Profile Determination for Uniform Filling in Injection Molding

Article

Closed-loop step response identification of integrating and unstable processes

Article

Effects of the geometry and operating temperature on the stability of Ti/IrO2-SnO2-Sb2O5 electrodes for O-2 evolution

Article

IMC-based iterative learning control for batch processes with uncertain time delay

Article

Multiblock-Based Qualitative and Quantitative Spectral Calibration Analysis

Article

Multi-objective optimization and selection for the PI control of ALSTOM gasifier problem

Article

Multivariate statistical monitoring of two-dimensional dynamic batch processes utilizing non-Gaussian information

Article

New insight into internal model control filter design for load disturbance rejection

Article

Phase-Based Joint Modeling and Spectroscopy Analysis for Batch Processes Monitoring

Article

Robust two-dimensional iterative learning control for batch processes with state delay and time-varying uncertainties

Article

Statistical analysis and online monitoring for multimode processes with between-mode transitions

Article

Statistical Monitoring and Fault Diagnosis of Batch Processes Using Two-Dimensional Dynamic Information

Article

Step response identification under inherent-type load disturbance with application to injection molding

Article

基于时段的间歇过程统计建模、在线监测及质量预报

Article

Advanced Process Identification and Control

Book

Control System for Injection Molding Process

Conference paper

Design of an advanced injection molding control system

Conference paper

Enhanced IMC-based load disturbance rejection design for integrating processes with slow dynamics

Conference paper

Extruder Temperature Control Using Multivariable Generalized Predictive Control

Conference paper

FASTER PROCESS STABILIZATION FOR INJECTION MOLDING BY AUTOMATIC PROFILING OF PLASTICATION ROTATION SPEED

Conference paper

Improved phase-based calibration modelling and quality prediction by investigating the effects of inter-phase correlation

Conference paper

INJECTION MOLDING PROCESS CONTROL USING 2D MODEL PREDICTIVE ITERATIVE LEARNING ALGORITHM

Conference paper

Injection molding process monitoring and control

Conference paper

On-line in-mold transducer in injection molding

Conference paper

The applications of multivariate statistical methods in injection molding process monitoring

Conference paper

A generalized relay identification method for time delay and non-minimum phase processes

Article

A survey on multistage/multiphase statistical modeling methods for batch processes

Article

Batch-to-Batch Steady State Identification Based on Variable Correlation and Mahalanobis Distance

Article

Covariance-oriented qualitative and quantitative calibration analysis for multistage batch processes

Article

Generalized predictive control of linear systems with actuator arrearage faults

Article

Identification and Autotuning of Temperature-Control System With Application to Injection Molding

Article

Improved calibration investigation using phase-wise local and cumulative quality interpretation and prediction

Article

In-mold Melt Front Rate Control Using a Capacitive Transducer in Injection Molding

Article

Model Migration for Development of a New Process Model

Article

Multivariate statistical monitoring of multiphase two-dimensional dynamic batch processes

Article

Nonlinear Batch Process Monitoring Using Phase-Based Kernel-Independent Component Analysis-Principal Component Analysis (KICA-PCA)

Article

Phase and transition based batch process modeling and online monitoring

Article

Process Similarity and Developing New Process Models Through Migration

Article

Survey on iterative learning control, repetitive control, and run-to-run control

Article

Two-Dimensional Dynamic Principal Component Analysis with Autodetermined Support Region

Article

Injection Molding Control

Book chapter

A design framework for iterative learning control (ILC) based on 2-dimensional model predictive control (2D-MPC)

Conference paper

An improved statistical modeling strategy by spectroscopy for online monitoring and diagnosis of batch processes

Conference paper

Batch process control from practice to 2D model predictive control

Conference paper

Batch Process Monitoring and Fault Diagnosis Based on Multi-Time-Scale Dynamic PCA Models

Conference paper

Development of Wastewater Quality Monitoring System Using Sensor Fusion And Machine Learning Techniques

Conference paper

Fault-tolerant control for batch processes - Overview and outlook

Conference paper

Identification of low-order process model with time delay from closed-loop step test

Conference paper

Identification of low-order unstable process model from closed-loop step test

Conference paper

Identification of time delay model for integrating processes from closed-loop step test

Conference paper

Improved independent component regression modeling

Conference paper

Iterative learning control of mold-open position in injection molding

Conference paper

A systematic approach for on-line identification of second-order process model from relay feedback test

Article

Alternative identification algorithms for obtaining a first-order stable/unstable process model from a single relay feedback test

Article

Barrel temperature control during operation transition in injection molding

Article

Development of a transducer for in-line and through cycle monitoring of key process and quality variables in injection molding

Article

Enhanced Process Comprehension and Statistical Analysis for Slow-Varying Batch Processes

Article

Identification of integrating and unstable processes from relay feedback

Article

Injection Molding Control: From Single Cycle to Batch Control

Article

Iterative learning model predictive control for multi-phase batch processes

Article

Iterative learning reliable control of batch processes with sensor faults

Article

Model Migration with Inclusive Similarity for Development of a New Process Model

Article

Process Modeling based on process similarity

Article

Robust Step-Like Identification of Low-Order Process Model Under Nonzero Initial Conditions and Disturbance

Article

Subspace identification for two-dimensional dynamic batch process statistical monitoring

Article

Variable structure control for a class of nonlinear systems with mismatched uncertainties

Article

An intelligent profiling strategy of injection velocity for uniform cavity filling based on recurrent neural network model

Conference paper

Barrel Temperature Control in Injection Moulding Process

Conference paper

Injection moulding control and optimization: from applied research to academic research

Conference paper

Multi-phase batch process monitoring

Conference paper

Relay-Based Autotuning of PID Controller for Improved Load Disturbance Rejection

Conference paper

Stage-Oriented Statistical Batch Processes Monitoring, Quality Prediction and Improvement

Conference paper

Active fault-tolerant control of nonlinear batch processes with sensor faults

Article

Adaptive monitoring method for batch processes based on phase dissimilarity updating with limited modeling data

Article

Analytical decoupling control strategy using a unity feedback control structure for MIMO processes with time delays

Article

Analytical two-degrees-of-freedom (2-DOF) decoupling control scheme for multiple-input-multiple-output (MIMO) processes with time delays

Article

Application of a capacitive transducer for online part weight prediction and fault detection in injection molding

Article

Batch process monitoring in score space of two-dimensional dynamic principal component analysis (PCA)

Article

Optimal start-up control of injection molding barrel temperature

Article

Optimization of decentralized PI/PID controllers based on genetic algorithm

Article

Robust fault-tolerant control of a class of non-minimum phase nonlinear processes

Article

Single-cycle and multi-cycle generalized 2D model predictive iterative learning control (2D-GPILC) schemes for batch processes

Article

新型注塑螺杆性能研究

Article

Batch Process Modeling Based on Process Similarity

Conference paper

Control of Multi-Phase Batch Processes: Formulation and Challenge

Conference paper

Electrocoagulation and Electroflotation of Restaurant Wastewater – Pilot Plant Study

Conference paper

Higher-Order Generalized 2D Predictive Iterative Learning Control Schemes

Conference paper

Two-Dimensional Dynamic PCA with Auto-Selected Support Region

Conference paper

From two-dimensional linear quadratic optimal control to iterative learning control. Paper 1. Two-dimensional linear quadratic optimal controls and system analysis

Article

From two-dimensional linear quadratic optimal control to iterative learning control. Paper 2. Iterative learning controls for batch processes

Article

Injection molding product weight: Online prediction and control based on a nonlinear principal component regression model

Article

Iterative learning fault-tolerant control for batch processes

Article

Kernel classifier with adaptive structure and fixed memory for process diagnosis

Article

Profiling of injection velocity for uniform mold filling

Article

Robust fault detection and isolation for uncertain linear retarded systems

Article

Robust iterative learning control design for batch processes with uncertain perturbations and initialization

Article

Stage-based online quality control for batch processes

Article

Statistical modeling and online monitoring for batch processes

Article

间歇过程的统计建模与在线监测

Article

2D MODEL PREDICTIVE ITERATIVE LEARNING CONTROL SCHEMES FOR BATCH PROCESSES

Conference paper

Development of A Capacitive Sensor for Injection Molding

Conference paper

Injection Molding Control & Monitoring

Conference paper

INJECTION VELOCITY CONTROL BASED-ON AN ITERATIVE LEARNING AND FEEDBACK COMBINED CONTROLLER

Conference paper

Process/Quality Monitoring of Injection Molding Process using Capacitive Transducer

Conference paper

PRODUCT DESIGN VIA PLS MODELING: STEPPING OUT OF HISTORICAL DATA INTO UNKNOWN OPERATING SPACE

Conference paper

注射成型用高性价比傳感器

Conference paper

Comparison of Ti/BDD and Ti/SnO2-Sb2O5 electrodes for pollutant oxidation

Article

Effect of dielectric material on microwave freeze drying of skim milk

Article

Integrated design and structure analysis of robust iterative learning control system based on a two-dimensional model

Article

MADDOCK注塑螺杆性能研究

Article

On-line detection of the gate freezing-off time for injection molding

Article

Robust design of integrated feedback and iterative learning control of a batch process based on a 2D Roesser system

Article

Stage-based process analysis and quality prediction for batch processes

Article

Two-dimensional dynamic PCA for batch process monitoring

Article

注射成型塑化过程的可视化实验研究

Article

间歇过程滑动窗口子时段PCA建模和在线监测

Article

塑料成型过程控制

Book chapter

Adaptive GPC control of barrel temperatures in injection molding

Conference paper

In-Mold Monitoring of Injection using capacitive transducer

Conference paper

On-line check-ring failure detection and compensation in injection molding

Conference paper

Part weight prediction using capacitive transducer in injection molding

Conference paper

Part Weight Prediction Using Captive Transduer in Injection Molding

Conference paper

Prospective of Injection Molding Control and Monitoring

Conference paper

基于在線測量技術的注塑成型塑化系統研究

Conference paper

基于在线测量技术的注塑成型塑化系统研究

Conference paper

注塑成型中的熔体温度均匀性研究

Conference paper

注塑成型塑化过程的可视化研究

Conference paper

A soft-sensor development for melt-flow-length measurement during injection mold filling

Article

An experimental study of solid-bed break-up in plasticization of a reciprocating-screw injection molding

Article

Capacitive transducer for in-mold monitoring of injection molding

Article

Multirate dynamic inferential modeling for multivariable processes

Article

PCA-based modeling and on-line monitoring strategy for uneven-length batch processes

Article

Sub-PCA modeling and on-line monitoring strategy for batch processes

Article

Advanced Control of Chemical Processes

Book

Advanced Control of Chemical Processes: A Proceedings Volume from the 7th IFAC International Symposium (ADCHEM), Hong Kong, China, 11-14 January 2004

Book

Advanced Control of Chemical Processes: A Proceedings Volume from the 7th IFAC International Symposium (ADCHEM), Hong Kong, China, 11-14 January 2004

Book

A FAULT DIAGNOSIS METHOD FOR FERMENTATION PROCESS

Conference paper

A ROBUST ITERATIVE LEARNING CONTROL WITH NEURAL NETWORKS FOR ROBOT

Conference paper

A stage-based monitoring method for batch process with minimal reference data

Conference paper

Robust Stable Adaptive Control Of Uncertain Bilinear Plants And Application For Distillation Column

Conference paper

Setting of Injection Velocity Profile via an Iterative Learning Control Approach

Conference paper

SOFT-SENSING OF THE DRY POINT OF BENZENE USING PCA AND DRBFN

Conference paper

Stage-Based Multivariate Statistical Analysis for Injection Molding

Conference paper

Within Cycle Prediction of Injection Molding Product Weight Control based on Principal Component Regression

Conference paper

A study of packing profile on injection molded part quality

Article

Combination method of principal component and wavelet analysis for multivariate process monitoring and fault diagnosis

Article

High-performance Ti/BDD electrodes for pollutant oxidation

Article

Robust Stability of Optimal Iterative Learning Control and Application to Injection Molding Machine

Article

塑料注射成型熔融过程中的固相破碎现象

Article

注射成型中的熔体温度均匀性研究

Article

注射成型塑化过程的可视化研究

Article

A Fault Accomodation Control for Nonlinear Processes

Conference paper

Injection Molding Control: Challenge and Prospective

Conference paper

Multi-PCA Models for Process Monitoring and Fault Diagnosis

Conference paper

Robust Stable Adaptive Control of Uncertain Bilinear Plants and Application for Distillation Column

Conference paper

Setting of Injection Molding Packing profile

Conference paper

Setting of Injection Velocity Profile via an Iterative Learning Control Approach

Conference paper

Stage-Based Multivariate Statistical Analysis for Injection Molding

Conference paper

Bound estimation for solutions of a class of delay differential inequalities

Article

Output feedback guaranteed cost control for uncertain discrete-time systems using linear matrix inequalities

Article

Processing of PC/LCP in situ composites by closed-loop injection molding

Article

基于质量的注塑过程建模方法研究：最优保压压力曲线的设定

Article

注塑过程熔体充填长度的动态神经网络软测量模型

Article

Intelligent Control of Injection Molding Process, a completion report submitted to Moog Japan Ltd.

Book

A control strategy for process with output dynamic nonlinearity

Book chapter

Solid-bed break-up during plastication in injection molding

Conference paper

Analysis and Implementation of the Double-Controller Scheme

Article

Fuzzy multi-model based adaptive predictive control and its application to thermoplastic injection molding

Article

H-infinity and (H)over-bar(infinity) control of retarded systems: a Razumikhin-type approach

Article

Identification and control of nonlinear processes in the presence of unmeasured load disturbances

Article

Optimal guaranteed cost control of discrete-time uncertain systems with both state and input delays

Article

PID-based sliding mode controller for nonlinear processes

Article

Robust iterative learning control with applications to injection molding process

Article

Strategies for injection filling velocity control

Article

Fuzzy modeling for injection molded part quality control

Conference paper

Optimal iterative learning control with uncertain initializations and disturbances

Conference paper

A simple nonlinear controller with diagonal recurrent neural network

Article

A visual barrel system for study of reciprocating screw injection molding

Article

Adaptive control of the filling velocity of thermoplastics injection molding

Article

An analytical predictive control law for a class of nonlinear processes

Article

Improved delay time estimation of RC ladder networks

Article

Mathematical Modeling of a Continuous Galvanizing Annealing Furnace

Article

Neural network approach to predict melt temperature in injection molding processes

Article

Neural network-based optimal iterative controller for nonlinear processes

Article

Predictive control for processes with input dynamic nonlinearity

Article

A Transparent barrel for study of reciprocating screw injection molding

Conference paper

An on-line measurement scheme of melt-front-area during injection filling via a soft-sensor implementation

Conference paper

Guaranteed cost control of uncertain discrete linear time-delay systems

Conference paper

Modelling and control of processes with output dynamic nonlinearity

Conference paper

Robust adaptive control of bilinear plants with high-order perturbation uncertainties

Conference paper

Robust H∞ Control of Discrete-time Linear System with Delayed Sate and Frobenius Norm-bounded Uncertainties

Conference paper

A neural-network-based nonlinear controller using an extended Kalman filter

Article

Control of injection velocity using a fuzzy logic rule-based controller for thermoplastics injection molding

Article

Control of integrator processes with dominant time delay

Article

Criteria for Quantitative Stability for a Class of Razumikhin-type Retarded Functional Differential Equations

Article

Cycle-to-cycle and within-cycle adaptive control of nozzle pressure during packing-holding for thermoplastic injection molding

Article

Evaluation of gas pressure dynamics for gas-assisted injection molding process

Article

Genetic algorithms and evolutionary programming hybrid strategy for structure and weight learning for multilayer feedforward neural networks

Article

Injection velocity control of thermoplastic injection molding via a double controller scheme

Article

Injection velocity control using a self-tuning adaptive controller

Article

Melt temperature profile prediction for thermoplastic injection molding

Article

Stability Criterion for Linear Systems with Nonlinear Delayed Perturbations

Article

A comparison of different strategies for injection filling velocity control

Conference paper

A double-controller scheme for controlling dominant delay processes

Conference paper

Adaptive Control of Injection Velocity of Thermoplastics Injection Molding

Conference paper

Adaptive Model Predictive Control of Filling Velocity of Thermoplastics Injection Molding

Conference paper

Control of Integrator Processes with Long Dead-Time

Conference paper

Injection Molding of Liquid Crystalline Polymers Reinforced Polycarbonate

Conference paper

Neural Networks Prediction of Melt Temperatures at Plastication Phase

Conference paper

On-line Prediction of Melt Temperature at Injection Nozzle Exit Using Neural Networks

Conference paper

Predictive Control with Neuro-compensation for a Class of Nonlinear Processes

Conference paper

Adaptive control of chaotic continuous-time systems with delay

Article

Adaptive control of nozzle melt packing pressure

Article

Compensation of dominant and variable delay in process systems

Article

Double-controller scheme for control of processes with dominant delay

Article

Double-controller scheme for separating load rejection from set-point tracking

Article

Adaptive Control of Injection Velocity and Packing Pressure of Thermoplastics Injection Molding, A final Report to Moog Japan Ltd.

Book

A Fuzzy Logic Controller for Injection Ram Velocity

Conference paper

Adaptive Control of Nozzle Melt Packing Pressure

Conference paper

An Experimental Analysis of Injection Molding Melt Temperature

Conference paper

射出成形におけるファヅィ理論を用いた自動保壓切換

Conference paper

Extraction of delay information from chaotic time series based on information entropy

Article

Injection Molding Control

Book chapter

A Real-time Fuzzy Logic Controller for Ram Velocity in Injection Molding

Conference paper

Complicated Dynamics in Simple Delay Systems

Conference paper

Multi-variable interaction analysis and a proposed quality control system for thermoplastics injection molding

Conference paper

Simple delay systems with chaotic dynamics

Conference paper

Cavity pressure control during the cooling stage in thermoplastic injection molding

Article

Cavity Pressure Dynamics and Self-tuning Control for Filling and Packing Phases of Thermoplastics Injection Molding

Article

Adaptive Control of Cavity Pressure During Filling

Article

Cavity Pressure Adaptive Control for Thermoplastics Injection Molding

Conference paper

Self‐tuning cavity pressure control of injection molding filling

Article

Cavity Pressure Control during Cooling

Conference paper

Control of Cavity Pressure during Packing, Society of Plastics Engineers

Conference paper

On-line Quality Monitoring Coupling Computer Analysis and Actual Measurement

Conference paper

Dynamics and Control of Surface and Mold Temperatures in Injection Molding

Article

Adaptive Control of Cavity Pressure During Filling, Society of Plastics Engineers

Conference paper

Cavity Pressure Control of Injection Molding Filling

Conference paper

A Versatile Computer Control System for Injection Molding

Conference paper

Mould Temperature Measurement and Control, Society of Plastics Engineers

Conference paper